The 16th Annual Long Island Woodworking Show

Two weekends ago, I was lucky enough to take my three (3) sons to the Long Island Woodworkers 16th Annual Woodworking Show at the Old Bethpage Village Fairgrounds.

Here we are!

Entering the show.

This is the 6th or 7th year in a row that I’ve attended the Long Island Woodworker’s Show and they’ve found their rhythm as far as size, exhibitors and venue. Since I’ve been going to the show I’ve seen it migrate from Sports Plus (a now defunct large entertainment venue) to Hofstra University to an American Legion Hall (a space so cramped with woodworking that you could barely walk) to the Old Bethpage Village Fairgrounds.

The wonderful timber framed barn that houses the show.

The building the show is in now is just the right size and certainly the right atmosphere. It’s a large, beautiful, timber framed barn, perfect for a woodworking show.

The show itself is made up of member exhibits, vendors and special interest displays. The Long Island Woodworking Club’s special interest groups are the L.I. Scrollsaw Association, the L.I. Woodturner’s Guild, the L.I. Cabinet & Furniture Makers and the Secret Society of Woodcarvers. Each special interest group (at least is seems like each, but I didn’t check) has a corner of the building where they give live demonstrations and talk up their craft.

Whats a woodworking show without Woodmizer?

The vendors aren’t the boutique shops you’ll see at Woodworking in America or the generic guys you’ll see at the Woodworking & D.I.Y. Shows. They were all medium sized and somewhat local. The ones I spend the most time with were Lakeshore Hardwoods and the member used tool sale.

A great photo, taken by Tom McKenna of Robert
having Toms son draw a raffle winner.

While I spent a good deal of my time chasing my kids around and trying to get them enthusiastic about this joint or that finish, the highlight was the wonderful chat I had with Robert of the Long Island Woodworker’s Club. He let my boys draw a raffle winner, and as I learned in Saratoga, he’s a great guy to talk too.

This cookbook rack was my favorite of the member gallery.

Unfortunately, I missed seeing Fine Woodworking’s Tom McKenna. Matt Kenney gave me a heads up that Tom was visiting the show, and it looks like he had a good time too. Check out his post about the Long Island Woodworkers Show here.

You can see my entire Long Island Woodworkers 16th Annual Woodworking Show Picasa gallery here.

Have you found your local woodworking show and discovered who you need to talk to there?

Monitoring the Finish

I’m lucky enough to have two (2) big (23” inch, I think) monitors at work. Since I got them, I’ve been looking to mount them to the wall and win back the desk space (I’ll never understand why flat panel monitors or TVs are left on their bases). By getting them off the desk I can slide the laptop dock under the primary monitor. That will let me set up my secondary printer where the laptop dock used to sit. The second monitor can now be hung above the phone, getting it closer to the first for a more seamless view between them.

My desk before the monitor wall mounting began.

I began by measuring the clearance I’d need for the laptop and determining where and at what height I’d like the monitors. Then of course I took their bases off and set them aside.

Laying out the mounting holes in the board.

As the wall is a steel framed, ½” gypsum wall typical of modern light commercial construction I was not comfortable mounting the monitor arms directly to the gypsum. Since I’m locating them relative to my chair and not the wall framing, I chose to mount a wooden board to the wall first. The board can be fastened to two (2) studs and the monitor arms can be mounted to the board, independent of the stud locations. Before I installed the board, I carefully layed out and pre-drilled all of the fastener holes.

We have board mounting!

Once the board was attached to the wall studs, it was a simple matter of attached the monitor arms in the pre-drilled holes, attaching the monitors to the arms and plugging everything back in.

Everything mounted and plugged in, the first time.

Unfortunately, I realized at that point that I had installed the to edge of the board at the height I had wanted the top edge of the monitor (the board is centered on the monitor height). That’s what I get for working in my office at 1:00 am.

The eye level view when the monitors were originally mounted.

A few minutes later I had taken it all apart, re-mounted the board lower, and re-assembled everything. This time the height seems dead on. I’ll move my laptop dock and confirm that it fits another day when it’s not the middle of the night. I’ll make another board to install above the original and hide the fastener holes from my first, aborted installation.

The second, correct height, mounting.

Why regal you, my dear woodworking readers, with the tale of mounting of my monitors to the wall in my office? Because that board I used to mount the monitor arms that I can now barely see behind the monitors was my finishing experiment. I used The Wood Whisperer’s Simple Varnish Finish method to finish it, and the finish came out excellent. I’ll be folding the monitors out of the choice to show the board off to my coworkers.

The beautiful mounting board, soon to be buried behind monitors.

If you’re nervous about finishing, you need to check Marc out. Between the Simple Varnish Finish DVD, the Finishing: It Aint’ Over Till It’s Over book and the abundant finishing advice he shares in his podcasts, he is a wealth of actionable finishing advice. You owe it to yourself to check him out.How are you finishing that project of yours?

The full photo album

Read More..