As I was finishing up the boom arm for the Ghetto WorkCenter, it dawned on me that I could also hand a tool holder on it.Festool includes tool holders as part of the WorkCenter. They also sell individual ones that fit on their CT vacuums. I have one of the individual ones. Unfortunately, my CT22 is too old to fit it. I have mine set into a block of wood that I clamp to my bench and BenchMark table. My ultimate plan is to use the Festool Tool Holder as a model to make a cabinet to hold all my sanders. For now, it served as a model to make a Tool Holder to fit on my Saw Tray. |
| This is how it began. |
I began with the same piece of ½” baltic birch Ive made the rest of the Ghetto WorkCenter out of. I began by tracing the V shape of the tool holder onto the plywood. I used a forstner bit to make the rounded bottom of the V. Then I cut out the rest on the bandsaw. My bandsaw cuts weren’t exactly straight, so I used my rasp to flatten them out.  |
| The Vs, fresh off the bandsaw. |
 |
| After smoothing the sides with a rasp. |
Once the V’s were rounded over with the router, it was just a matter of attaching the cleat and spacer so I could hang it on the saw tray. |
| Im loving my Bosch MRC23EVSK. It has great dust collection & visibility to boot. |
 |
| The cleat on the left hooks the saw tray and the spacer on the right keeps in basically plumb. |
Even with the ½” plywood, it’s working great so far. |
| She holds like a champ. |
I’m not sure if I’ll add more accessories to the Ghetto WorkCenter, but for a little bit of plywood and some cheap fasteners, it’s proving to be a great addition to the shop.
Read More..
Over the past two (2) weekends Ive been able to get back out to the tree house. Though Ive only been able to get half-days in, I have managed to just about finish the sheathing.
 |
| The tree house, as it stood before the last two weekends work. |
?
This video shows the sheathing of the gable ends, and all the frustration that entailed.
This shorter video shows an easier day of protecting the roof and sheathing the clearstory wall.
The next step will be to install the clearstory windows. The next two (2) weekends are just about spoken for, but hopefully Ill sneak in some window time too.
 |
| The sample Kalwall panels Im making the clearstory windows from. |
?
Read More..
